Trimming a woody surface or leveling, all are quite crucial processes and should be performed with great care and expertise. Beautifying woodwork depends on the manner in which the rough wood has been treated. Otherwise no matter how good is your finishing equipment or facilities you cannot reach your desired precision. So you should know the best ways to handle your belt sander machine with maximum accuracy.
Page Content
Use Belt Sander Machine with More Surface Area
It is better to use the belt sander machine that has more area on the belt for smoothing the rough surface. When the sander has a more flat surface area then it is very easier to handle the sander and does not move from the working surface.
Use the Sander at Low-Speed Option
It is best to use the sander at a lower speed as it will be easier to use for removing all the roughness from the wooden surface. Apart from that using the sander at the lower speed option will protect you from digging into the surface at a high pace. So use should use the sander whose speed can be changed easily.
Keep Your Body Right Over the Sander
You should keep your body, especially your shoulder right over the sander to keep yourself in a perfect balance for using the sander. It is very important to be in the right position for using the sander because shaving off the wooden surface cleanly requires a good position to do so.
Mark the Surface
For smoothing the required amount of wood you should mark the wooden surface to avoid any mistake in the usage of the sander. When the surfaces are properly marked the use of sander can be accurately monitored and any extra shaving of the wood can be avoided.
Use Cleaning Sticks on Regular Intervals
You should use the cleaning sticks to remove the sawdust on the surface as this will increase the life of the belt and increase the accuracy of the woodwork. When you use the sander it gets warm and the sawdust sticks to the belt surface and this is where you should be careful to clean the belt at regular intervals. Before ordering the sander from industrialsolution.ae follow the direction in the article as they will make you feel great about your work.
